Harald Müller gave me my Elliot in 2010.
The Elliot is a notched belay tube. It is forged from aluminum alloy and soft anodized It has 2 slots with ribbed v grooves and a plastic-covered cable keeper. Mine is 45 mm. long, 54 mm. wide, 92 mm. high, and weighs 63 g. The slots are 34 mm. long and 16 mm. wide. The top of the Omega oval carabiner that I use for comparing belay tubes sits 16 mm. below the ends of the slots.
One side of the Elliot is printed with "ELLIOT ST" and "8-11mm."
The following belay tubes are essentially identical:
|Brasovia Notched||Epic Peak||NTR|
|Climb Tech||Fusion Neo-Sat||Stubai BC PRO|
|Cypher||Good Makings Notched||Yoke|
The shallow V-notches used in this design do not seem to be very effective at increasing the braking force. The notches do not have the narrow angle found on the Trango Jaws and its equivalents, so they do not create the same wedging action.